Types Of Loft Conversions
Dormer Loft Conversions in london
Dormer Loft aso known as the box dormer is the most popular style of loft conversions, especialy in London. Box dormers are generally built to the back of the existing roof, enabling extra living area and headroom inside the loft conversion.
In a typical configuration, the conversion’s rear elevation the dormer face and cheek walls are usually built from timber studwork with tile, slate or sometimes timber cladding.
Box Dormers thrust out-ward on the roof slope, normally at the rear of the property which enable it to be integrated a number of styles. Inside a dormer should have a horizontal ceiling and vertical walls when compared to the standard diagonal sides of any conversion. In lofts that have limited space or headroom a dormer will give you extra room that will complete a conversion feasible. .
Hip to Gable Loft Conversions
The hip-to-gable conversion, where a preexisting pitched roof hip is replaced by a new vertical gable wall,which is usually at the side of the structure, is usually carried out as a conversion in its own rightso that you can increase the size of a current roof space. Generally, though, the hip to gable loft conversions are carried out to be able to not only to increase the size accessible, but also to produce support for brand new structural ridge and floor beams, and quite often new purlins, as part of an increased dormer conversion. Additionally, such a conversion may be required to provide headroom for a new staircase.
A new gable end may be produced in two ways: Masonry - the gable end is built up in brick to complement the existing. Alternatively, blockwork can be utilized and given a render finish. The gable end is built up in timber studwork. The stud structure may " be battened out for tile hanging. Additionally, expanded metal lathing may be fixed and a render finish applied. Appropriately designed, the timber studwork gable is capable of supplying support for the steel ridge beam. The side dormer may either be set within the inside of the roof slope or built up on the head of it the gable wall the hip to gable conversion replaces part of an existing roof hip.
Side dormers are sometimes implemented when a full hip to gable loft conversion is not appropriate for planning this is why the hip to gable loft conversions are often built to provide headroom clearance for a new stairway.
Mansard Loft Conversions
The determining level of quality associated with theconventional mansardroof structure is its broken slope, with a long, steep lowersegment and a reduced and flatter upper slope. This form takes its identify, and namebelonging to the Frenchdesigner Francois Mansart although he did not create it. ln traditional construction, the mansard’s double slope rises from the eaves and is applied to each elevation of the building. When applied 1 ( only to opposing elevations, it is sometimes described as a gambrel or gabled mansard.
The term ’mansard’ is now utilized rather vaguely to any roof using a steeply pitched major slope. In the case of a mansard loft conversion, a steeply-pitched lower slope is applied to the rear elevation and sometimes to the front as well.
Where it is applied to an urban front elevation this could rise from behind a parapet wall as an edition of a butterfly roof. Since thepresent day form usually includes a flat upper slope, it is usuallyknown as a half mansard.
The mansard is a recessive form, with the notion that should be inclined, and it is there- foresuccessful inlowering theobvioussize of a transformed roof space. Properly detailed and correctly implemented, the mansard is most likely by far the most attractive of the styles of loft conversions. ln a variety of inner London boroughs, taking on a mansard- design slopeis oftentimes a planningnecessity especialy when facing highway elevations when terraced roofs aremodified Note that an alteration of this sort is usually thought to amount to a roof extension rather than a loft conversion with the reason for planning and building control.
Mansard conversions are occasionally placed on the back elevation only, with gables or compartment walls extended upwards to form flank gables As with full-width dormers with masonry flanks above, this approach is most easily used in terraced houses in which the existing party wall parapets pro-ject above the roof slope.
With regard to appearance, the modern flank gable walls are generally raked back to match the pitch angle of the mansard. The mansard slope, that is usually inset from the masonry flanks, is generally clad with slate or tile.
Loft Storage Room
loft storage rooms will always include the strengthening of the loft joists,especialy if we cannot use steel beams, this sometimes dose accure due to the hight of the roof bieng lower than 2.4 . Loft storage rooms usally will include tongue and grooving flooring, lighting, a loft ladder, insulation, and plaster-boarded stud walls, Velux windows, and left plastered ready for painting. This would also include installing access doors in to the eaves, this provides you all the more space for storage on both sides of the room.
